* Nordic nRF52840 SoC Solution Dongle
* A recommended 3rd-party module by Nordic Semiconductor.
* BT5.4 & BT5.2 & BT5.1 & BT5 Bluetooth Specification Certified.
* Supports BT5 Long Range Feature
* Deployed Raytac MDBT50Q-P1M Module
* Certifications: FCC, IC, CE, UKCA, Telec (MIC), KC, SRRC, NCC, RCM, WPC
* 32-bit ARM® Cortex™ M4F CPU
* 1MB Flash Memory / 256kB RAM
* RoHS & Reach Compliant.
* Dimension：43.1 x 18 x 9.3 mm
* Highly flexible multiprotocol SoC ideally suited for Bluetooth® Low Energy, ANT+, Zigbee, Thread (802.15.4) ultra low-power wireless applications.
Raytac nRF52840 Dongle deployed MDBT50Q-P1M module which is the most convenient tool to easy the implement fo Bluetooth 5 application.
Raytac’s MDBT50Q-RX is a BT5.4 qualifed module designed based on Nordic nRF52840 SoC solution, which incorporates: GPIO, PWM and USB interfaces for connecting peripherals and sensors.
Bluetooth Qualified Specification: BT5.4 / BT5.3 / BT5.2 / BT5.1 / BT5
Regional Regulation Pre-Certified: FCC/IC/CE/Telec/KC/SRRC/NCC/WPC/RCM/UKCA
Quick Specifications
Bluetooth 5, IEEE 802.15.4, 2.4 GHz transceiver
• -95dBm sensitivity in 1Mbps Bluetooth low energy (BLE) mode
• -103dBm sensitivity in 125Kbps BLE mode (long range)
• +8 dBm TX power (down to -20 dBm in 4 dB steps)
• On-air compatible with nRF52, nRF51, nRF24L and nRF24AP Series
• Programmable output power from +8dBm to -20dB
• RSSI (1dB resolution)
• Supported data rates:
• Bluetooth 5: 2Mbps, 1 Mbps, 500 kbps, 125 kbps
• IEEE 802.15.4-2006: 250 kbps
• Proprietary 2.4 GHz: 2 Mbps, 1 Mbps
ARM® Cortex™-M4F 32-bit processor with FPU, 64 MHZ
Memory: 1MB flash / 256KB RAM
HW accelerated security
• ARM TrustZone Cryptocell 310 security subsystem
• 128 bit AEC / ECB / CCM / AAR co-processor (on-the-fly packet encryption)
Interfaces on device
• USB 2.0 full speed (12Mbps) controller
• Programmable Peripheral interconnect (PPI)
• 1 x Switch and max. 2 x LED
• EasyDMA automated data transfer between memory and peripherals
4 x 4 channel pulse width modulator (PWM) units with EasyDMA
3 x 24-bit real-time counters (RTC)
Flexible power management
• On-chip DC/DC and LDO regulators with automated low current modes
• Automated peripheral power management
• Fast wake-up using 64MHz internal oscillator
• 0.4uA at 3V in System OFF mode, no RAM retention
• 1.5uA at 3V in System ON mode, no RAM retention, are on RTC
Nordic SoftDevice ready and with support for concurrent multi-protocol
Datasheet
RoHS & REACH Report