AN7002Q-P
* Nordic nRF7002 WiFi Solution
* WiFi 6
* Dual Band 2.4 GHz and 5 GHz
* Complies with 802.11a/b/g/n/ac/ax
* Supports Target Wake Time (TWT)
* Supports Wi-Fi 6 Station (STA)
* 20 MHz channel bandwidth
* 64 QAM (MCS7), 86 Mbps PHY throughput
* Intended for WiFi, FCC, IC, CE, Telec (MIC), KC, SRRC, NCC, RCM, WPC
* Intended for RoHS & Reach Compliant.
* Dimension: 10.8 x 17.1 x 2.1 mm (0.43 by 0.67 by 0.08 inches)
* PCB Antenna
Raytac’s AN7002Q is a low power WiFi 6 module designed based on Nordic nRF7002companion solution and it supports dual-band 2.4 GHz and 5 GHz band operation. Theantenna ports are single-ended 50 Ω and it supports 20 MHz wide channels, 1x1 SingleInput Single-Output (SISO) operation and can deliver a PHY data rate of 86 Mbps (MCS7).
AN7002Q series is a wireless module that adds low-power Wi-Fi 6 capabilities to anotherSystem on Chip (SoC), Microprocessor Unit (MPU), or Microcontroller Unit (MCU) host.
AN7002Q is compatible with IEEE 802.11ax (also known as Wi-Fi 6) and with earlierstandards IEEE 802.11 a/b/g/n/ac. It is designed for IoT applications and is ideal for addingmodern Wi-Fi 6 capabilities to existing Bluetooth® Low Energy, Thread®, Zigbee®, or Mattersystems.
It is connected to the host SoC or MCU through a Serial Peripheral Interface (SPI) or QuadSerial Peripheral Interface (QSPI) serial interface (which can optionally be encrypted) andsupports coexistence with other radio protocols through a dedicated 3-wire or 4-wirecoexistence interface.
It supports Station and Wi-Fi Direct operation modes as well as Software Enabled AccessPoint (Soft AP) (Wi-Fi 4 operation only) and simultaneous station + soft AP/Wi-Fi Direct/stationmodes.
1.1. Features1. Wi-Fi® 6 companion IC with integrated RF.
2. Supports IEEE 802.11 ax and earlier standards (IEEE 802.11 a/b/g/n/ac)
3. Supports Target Wake Time (TWT), Orthogonal Frequency Division Multiple Access(OFDMA), Basic Service Set (BSS) Coloring
4. Supports Wi-Fi CERTIFIED 6™, Wi-Fi CERTIFIED™, Wi-Fi Enhanced Open™
5. Supports WPA3™, WPA2™, WPA™ - Personal and Enterprise, Protected ManagementFrames
6. Supports WMM®, WMM - Power Save, Wi-Fi Agile Multiband™, Wi-Fi Direct®
7. Dual-band 2.4 GHz and 5 GHz operation in 1x1 (SISO) operation.
8. 3-wire or 4-wire coexistence interface and compatible with Raytac MDBT53 series module.